|
 |
 |
 |
 |
 |
|
|
Cognitive Solutions’ C/Rx Provides Optimal Workflow, Cost,
and Performance for Your Pharmacy Printing Applications
The C/Rx printing solution offers pharmacies the ability to save time and costs associated with their prescription fulfillment process.
The C/Rx printer generates prescription labels fast and saves money on
energy and supplies. The simple media path prevents label jams and ensures long-lasting performance. Because the C/Rx is a thermal printer, no messy or expensive toner is required and it utilizes far less energy than a laser printer, a ratio of 10:1 energy consumption.
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
|
|
|
LCD User Control Panel
For more information regarding Cxi LCD menuing and setup, please refer to Chapter 2 of the C-Series users guide located at add link to the C Series software and downloads section
Setup
LEFT button (B): Press the LEFT button to display the current printer status. From within the menu, pressing the LEFT button returns to the previous menu level.
UP (A) and DOWN (C) buttons: Allows menu navigation up and down through the menu tree, and allows the user to increase or decrease numeric values in some menu items.
RIGHT button (D): Allows the user to enter the menu system, and controls horizontal movement of the menu cursor for certain menu items.
ENTER button (E): In the menu mode, selects a menu item for further navigation. ENTER also selects a value in a menu item. The LCD displays the confirmation message VALUE HAS BEEN SET.
At the highest menu level, when COGNITIVE is displayed on the LCD, or when the printer is ready to print, this button acts as a FORM FEED.
When the ENTER button is pressed, a single label is fed if the printer is in an indexing mode. When the button is pressed continuously for longer than two seconds, the printer feeds labels until the button is released. When indexing is disabled, the printer feeds media continuously when the ENTER button is pressed.
MAIN MENU |
|
USER MENU |
|
LCD Contrast |
Contrast 0 … 8 |
Backlight Control |
ON or OFF |
|
|
Beeper Volume |
Volume 0 … 3 |
Set Date and Time |
Date (MM/DD/YY)
Time (HH:MM:SS) |
SETUP MENU |
|
COMM Menu |
|
|
Serial |
BAUD |
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 |
|
|
|
|
|
PARITY |
Even, Odd, None |
|
|
|
DATA Bits |
7 or 8 |
|
|
|
STOP Bits |
1 or 2 |
|
|
Ethernet |
DHCP |
ON or OFF |
|
|
|
Set Static IP |
XXX.XXX.XXX.XXX |
|
|
|
Set Subnet |
XXX.XXX.XXX.XXX |
|
|
|
Set Gateway |
XXX.XXX.XXX.XXX |
|
Transfer Mode |
Direct Thermal or Thermal Transfer |
|
Speed |
High, Normal, Low |
|
DPI Select |
200dpi |
Selectable 200 or 100 dpi |
|
|
300dpi |
Selectable 300 or 150 dpi |
|
Index |
Bar, Gap, Notch |
|
Width |
16 … 425 |
Quick UP / DWN key press increments by 1;
Press and hold increments by 10 |
|
Top Of Form Adjust |
0 … 2000 |
Quick UP / DWN key press increments by 1;
Press and hold increments by 10 |
|
Darkness |
-200 … 813 |
Quick UP / DWN key press increments by 1;
Press and hold increments by 10 |
|
Feedback |
ON or OFF |
|
Report Level |
0 = None, 1 = Serial, 2 = Label |
|
Timeout |
0 … 65535 |
Quick UP / DWN key press increments by 1;
Press and hold increments by 10 |
CALIBRATION
MENU |
Calibration Menu Start? |
Based on Bar, Gap or Notch index setting |
TEST MENU |
Label or Objects |
OPTIONS MENU |
External 5 volts |
ON or OFF |
SETTINGS MENU |
|
|
|
|
|
|
Save Settings |
Yes? Or No? |
|
Read Settings |
Yes? Or No? |
|
Factory Defaults |
Yes? Or No? |
CUSTOMER SUPPORT |
Phone : 1-800-525-2785 Web : COGNITIVE.COM |
RETURN |
Return to Main Menu |
|
|
|
|
 |
 |
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
